EasyLine GSM

Miniature phone (PSTN) simulator (6 x 4 cm)

icon_48_72icon_plug&playicon_garancia3_hu

icon_yes

TIP/RING connection to PSTN line simulation

icon_yes1 SMS contact input

icon_yes 1 OC output

icon_yesSMS forwarding

icon_yesContact ID, 4/2 protocol

icon_yesProgramming by SMS or phone (dmtf)

icon_yesOutput control by saved numbers on the SIM card

Nyomtatás
  • The EasyLine GSM simulates analog telephone line (PSTN) along with forwarding voice messages from the alarm center to the monitoring receiver trough GSM network.
  • Plug & Play: the GSM device can be used without programming.
  • It can forwards the most widely used protocols (Contact ID, 4/2 or SIA FSK). It transmits the codes generated by the alarm center in the form of voice call on the simulated line trough the GSM network.
  • Programming is possible by SMS commands from any number by using security code.
  • By default input is close (NC), which will send a notification to a predefined telephone number if there is a rupture.
  • It is equippped with one OC output, which can be controlled by free call with caller identification with 250/500 user phone number depending on the type of the SIM card. .
Inputs (+ expander):                         1 (NO)
Relayed Outputs (+ expander):
Relayed output load:
OC outputs (+ expander):
OC output load:               max. 30V@400mA
User phone numbers for sending notification:                                1
User phone numbers for output control: Unlimited or 250/500 phone number
Independent signal sending to monitoring center:
User phone numbers for forwarding incoming SMSs:
                            /1
Transmission channel:                    GSM/GPRS
Caller identification:
Alarm center function (arm/disarm, entry/exit delay)
Selectable 24h zones:
Adjustable input sensitivity:
Configurable inputs (NO/NC):
Independent SMS sending to user phone numbers with customized text:
Monitoring station phone numbers:
Periodic test report sending:
Sending recorded voice message to user phone numbers:
Sending alarm to user phone number with siren sound:
Inbuilt internal clock:
Event list / number of stored events:
GSM siognal strength monitoring and logging hourly
Translation Contact ID codes into SMS along with sending it to user phone numbers (Distinguishing 250 events and 250 zones)
Configurable own Contact ID codes:
Telephone line simulation:
PSTN phone line monitoring:
Output activation with free GSM call:
Security SMS password:
Programming software(PC, Android):
Programming method:                     SMS / DTMF
Battery connection options:
Power drain (standby/transmitting over GSM):                  30mA/700mA
Simulated line/transmitting over GSM:
Power voltage:                       9-20 VDC
  • Power voltage: 9-20 VDC
  • Standby power drain: 80 mA
  • Maximum power drain: 1000 mA
  • Open Collector output load: max. 30V/300 mA mA
  • GSM module type: SIMCOM 900
  • GSM frequency: GSM 850 / EGSM 900 / DCS 1800 / PC 1900 (Multi-Band)
  • SIM card usage: brand free GSM module
  • GSM antenna type: SMA connector (comes with package)
  • Dimensions: 62 x 42 x 16 mm, packed: 132 x 128 x 32 mm
  • Operation temperature: -20°C – +50°C
  • Simulated line instead of the analog phone line
  • Line simulator for alarm centers
  • Control: arming/disarming alarm center
  • Providing GSM line at telephone centers

Programming

The package contains

icon_yesmodul
icon_yesantenna
icon_yesspacer
icon_yeshole temple
icon_yesinstaller manual
icon_yeswarranty ticket